Heat Pump COP and Low Temp Lock Out

This episode of the HVAC School Live Stream covers the key concepts around heat pump efficiency and understanding the coefficient of performance (COP). Eric Kaiser from TruTech Tools and Jim Fultz from White-Rodgers provide valuable insights into how heat pumps operate and how to optimize their performance, especially in colder weather conditions.

The discussion begins by exploring the COP of heat pumps and how it compares to the efficiency of electric resistance heat. A COP above 1 means the heat pump is delivering more heat for the same amount of energy input compared to electric resistance heat. Many homeowners mistakenly believe they should switch to emergency heat once the outdoor temperature drops, thinking the heat pump is no longer efficient. However, even at very low outdoor temperatures, a well-designed heat pump can still operate with a COP above 1, making it a more cost-effective heating option than emergency heat.

The conversation then delves into the concept of the thermal balance point, which is the outdoor temperature at which the heat pump can no longer meet the heating load of the home. The guests discuss how to calculate this balance point and how to set up controls to optimize the use of the heat pump and any supplemental heating sources, such as electric resistance heat or a gas furnace in a dual-fuel system. They emphasize the importance of proper air distribution and avoiding blowing cold air directly on the occupants, which can be a common complaint with heat pumps.

Key Topics Covered:

Coefficient of Performance (COP) and how it compares to electric resistance heat

Efficiency of heat pumps at low outdoor temperatures

Thermal balance point and how to calculate it

Optimizing control settings to balance heat pump and auxiliary heat usage

Importance of proper air distribution and avoiding blowing cold air directly on occupants

Considerations for dual-fuel systems with both a heat pump and a gas furnace

Best practices for programming thermostats and control systems to ensure optimal performance and comfort

Have a question that you want us to answer on the podcast? Submit your questions at https://www.speakpipe.com/hvacschool.

Learn more about the 5th Annual HVACR Training Symposium at https://hvacrschool.com/Symposium24.

Subscribe to our podcast on your iPhone or Android.

Subscribe to our YouTube channel.

Check out our handy calculators here or on the HVAC School Mobile App for Apple and Android.

Comments

Surge Protection Basics w/ DITEK

Q&A – Am I Toxic For Caring? – Short #216

App Based HVAC Learning

Q&A – Apps for Doing Proper Loads – Short #215

Jim Bergmann & MQ Update from NCI Summit

Q&A – System Won’t Dehumidify? – Short #214

What Is Up With Blower Amps & Watts w/ Steve Rogers

Q&A – Sizing Heat Pumps for Heat Load – Short #213

Water Issues – Spidey Sense

Q&A – Cultural Diversity – Short #212

#COP #emergency heat #heat pump #heat pump efficiency #hvac #thermal balance

Author:

Jim Fultz

Company: Copeland / White-Rodgers

Position: Technical Training Specialist

Bryan Orr

Company: HVAC School

Position: Founder

Eric Kaiser

Company: TruTech Tools, LTD

Position: Industry Engagement Manager

Check out our most recent video

How to Evacuate an AC system, Full Vacuum Procedure

Our latest Podcast

HVAC School – For Techs, By Techs

Real training for HVAC ( Heating, Ventilation, Air Conditioning and Refrigeration) Technicians. Including recorded tech training, interviews, diagnostics and general conversations about the trade.

In this enlightening episode, we sit down with Mike, a 20-year veteran from DITEK, a leading American manufacturer of surge protection devices based in Largo, Florida. The conversation begins with a brief discussion about recent hurricane impacts in the Tampa Bay area, where DITEK maintains its 65,000-square-foot manufacturing facility. Mike shares how the company, despite facing challenging weather conditions, continued its operations and maintained its commitment to American manufacturing.

The bulk of the discussion centers around surge protection technology and its critical importance in protecting HVAC systems and other electronic equipment. Mike provides an excellent analogy, comparing surge protectors to pressure relief valves for electrical systems. He explains how Metal Oxide Varistors (MOVs) work as semiconductors that create low impedance paths to ground when voltage exceeds certain thresholds. The conversation delves into the evolution of MOV technology, particularly the development of thermally protected MOVs that provide enhanced safety features.

The episode also addresses common misconceptions about surge protection, particularly the belief that surge protectors are primarily for lightning protection. Mike explains that while lightning strikes are a concern, especially in areas like Florida, approximately 65% of surges actually originate from within facilities themselves, often from equipment cycling on and off or other power quality issues. He emphasizes the importance of proper installation, particularly regarding ground connections and lead lengths, noting that every six inches of wire length can add about 100 volts to the clamping voltage of the device.

Key Topics Covered:

DITEK’s history and commitment to American manufacturing
Basic principles of surge protection and how MOVs work
Evolution of MOV technology and thermal protection features
Difference between transient voltage and temporary overvoltage (TOV)
Importance of proper grounding and lead length in surge protection
Cascading surge protection strategy for comprehensive protection
UL testing standards and voltage protection ratings (VPR)
Common misconceptions about surge protection
Impact of aging electrical infrastructure on power quality
Importance of customer support and ethical business practices
Installation best practices for surge protection devices
Relationship between ground resistance and surge protector performance
Types of surge protective devices (SPD) and their classifications

Learn more about DITEK at https://www.diteksurgeprotection.com/.

Have a question that you want us to answer on the podcast? Submit your questions at https://www.speakpipe.com/hvacschool.

Purchase your tickets or learn more about the 6th Annual HVACR Training Symposium at https://hvacrschool.com/symposium. Subscribe to our podcast on your iPhone or Android. Subscribe to our YouTube channel. Check out our handy calculators here or on the HVAC School Mobile App for Apple and Android.