#p trap

Tech Tips:

We recently received a Speakpipe question for the podcast about a common nuisance call on straight-cool A/C units and heat pumps. The systems, often retrofit units, were backing water up into the secondary drain pan and overflowing it. This issue isn’t happening on furnaces, which are positively pressurized, which means we have to take a […]

Understanding “P” Traps in Refrigerant Lines

This article was written by Don Gillis with Chemours. Thanks, Don! There are 3 main reasons we use “P” or “U” traps: Assisting in oil return to the compressor Preventing oil accumulation in the evaporator Preventing liquid refrigerant or oil from entering the compressor while operating or during the off cycle Assisting in oil return […]

Q&A – Drain Traps & Static – Short #209

In this short Q&A podcast episode, Bryan answers a question about drain traps and static pressure. This question was sent by Stephen with The Comfort Squad when he noticed an uptick in nuisance calls on retrofit systems that kept having their secondary drain pans filled. In negatively pressurized systems (i.e., straight-cool or heat pump […]

Check out our most recent video

How to Evacuate an AC system, Full Vacuum Procedure

Our latest Podcast

HVAC School – For Techs, By Techs

Real training for HVAC ( Heating, Ventilation, Air Conditioning and Refrigeration) Technicians. Including recorded tech training, interviews, diagnostics and general conversations about the trade.

Bryan discusses surge protection devices (SPDs) with Mike from DITEK, focusing on practical applications for HVAC contractors and how to provide value to clients. Mike emphasizes that surge protection is essential for modern HVAC systems, particularly given that they are typically the most expensive appliance in a home and increasingly rely on sophisticated electronic components like variable-speed compressors and inverter boards.

The conversation delves into installation best practices, with a detailed discussion of proper wiring techniques for SPDs. Mike explains that surge protectors should be installed in parallel with the circuit, typically at the disconnect, and addresses common concerns about double-tapping lugs and ground connections. He emphasizes the importance of keeping wire lengths as short as possible and provides guidance for installations both with dedicated disconnects and panel-direct connections.

A significant portion of the episode focuses on DITEK’s Kool Guard (KG2) product, which represents an evolution in HVAC protection by combining surge protection with voltage monitoring. Mike explains how modern HVAC equipment, particularly inverter-driven systems, is increasingly sensitive to both over-voltage and under-voltage conditions. The Kool Guard monitors voltage on each phase independently and provides visual indication of fault conditions through LED indicators, making it easier for homeowners to identify potential issues without opening electrical enclosures.

Key Topics Covered:

· Why every modern HVAC system needs surge protection

· Installation locations and proper wiring techniques for SPDs

· The difference between line-side and load-side installation

· Ground connection best practices

· How to protect both condensers and air handlers

· The evolution from basic surge protection to voltage monitoring

· The importance of voltage monitoring for modern inverter-driven equipment

· How Kool Guard monitors voltage phase-to-ground vs line-to-line

· Common power quality issues beyond lightning strikes

· How to discuss surge protection with customers

· The limitations of utility-provided surge protection

· The impact of aging power infrastructure on power quality

· The advantages of USA-made surge protection products

· How voltage monitoring prevents damage from brownouts and over-voltage conditions

· The pre-programmed voltage protection ranges in Kool Guard

· Visual indication features for fault conditions

Learn more about DITEK at https://www.diteksurgeprotection.com/.

Have a question that you want us to answer on the podcast? Submit your questions at https://www.speakpipe.com/hvacschool.

Purchase your tickets or learn more about the 6th Annual HVACR Training Symposium at https://hvacrschool.com/symposium. Subscribe to our podcast on your iPhone or Android. Subscribe to our YouTube channel. Check out our handy calculators here or on the HVAC School Mobile App for Apple and Android.