Building Automation Basics for the HVAC Tech w/ Phil Zito (Podcast)

In this episode Phil from Building automation monthly comes on and talks building automation and demystifies some of how it works.

If you have an iPhone subscribe to the podcast HERE and if you have an Android phone subscribe HERE

Comments

Related Tech Tips

Duct Smoke Detectors/Alarms and the Code
Whenever there is a conversation where “code” is involved, it's important to mention that codes can vary depending on the AHJ or authority having jurisdiction. It's becoming more common for governments to lean heavily on the ICC (International Code Council). In the case of HVAC/R, that is the IMC (International Mechanical Code), and in the […]
Read more
Solenoid Facts
Do you know how a solenoid valve works? Really? On the surface, I think we all understand how a solenoid valve works. The coil energizes, creating an electromagnet. That temporary magnetism lifts an iron plunger within the valve allowing refrigerant to flow. But is it really that simple? It turns out that the answer isn't […]
Read more
Changing Liquid Filter/Drier Cores Tip
This tip comes from market refrigeration and controls technician Kevin Compass. Thanks, Kevin! A little tip when changing liquid cores: If you start pumping them down, begin bypassing discharge gas into the shell to warm it up, push out the remaining liquid, and bring the shell above the dew point so that it doesn't sweat […]
Read more
loading

To continue you need to agree to our terms.

The HVAC School site, podcast and daily tech tips
Made possible by Generous support from