Hard Start Kits, Staybrite #8, Motor Ratings, AHR and Much More

February 8, 2017

In this episode of the HVAC School Podcast we talk about –

– Carrier's bypass economizer

– Hard Start Kits

– StayBrite #8

– Discharge Line Temperature

– Coremax Valve Cores

– Notched Belts

– Motor Temperature ratings

and much more……

Check out our most recent video

How to Evacuate an AC system, Full Vacuum Procedure

Our latest Podcast

HVAC School – For Techs, By Techs

Real training for HVAC ( Heating, Ventilation, Air Conditioning and Refrigeration) Technicians. Including recorded tech training, interviews, diagnostics and general conversations about the trade.

Bryan and Craig Migliaccio (AC Service Tech)dive deep into the complexities of managing condensate drainage in high-efficiency (90%+) gas furnaces. The conversation begins with a clear explanation of why these furnaces produce condensate in the first place – they have two heat exchangers that extract so much heat from the combustion gases that water vapor condenses out. This condensate is acidic (pH 3-5) and requires special consideration for drainage and disposal.

The discussion explores various challenges contractors face when installing these systems, particularly in cold climates where freezing is a concern. Craig shares practical solutions from his experience in New Jersey, including using larger diameter pipes for exterior drainage and creating air gaps to prevent complete freezing. They address the ongoing debate about whether to combine AC condensate lines with furnace condensate lines, noting that while it’s technically possible, there are potential risks and code considerations to keep in mind.

A significant portion of the conversation focuses on code compliance and best practices for condensate disposal. The International Mechanical Code (IMC) provides several acceptable options for drainage, including floor drains, utility sinks, and standpipes. However, as Craig points out, local interpretations and requirements can vary significantly, making it crucial for contractors to maintain good relationships with their local inspectors and understand their specific jurisdiction’s requirements.

Key Topics Covered:

How 90% efficient furnaces produce condensate through their dual heat exchanger system
The acidic nature of furnace condensate and its corrosion potential
Solutions for preventing condensate line freezing in cold climates
Pros and cons of combining AC and furnace condensate lines
Code-compliant drainage options (IMC 307.2)
Use of condensate pumps as a solution for difficult drainage situations
Importance of proper trapping and venting in condensate systems
Requirements for auxiliary drain pans under furnaces
Role of condensate switches and safety controls
Challenges with different installation locations (crawl spaces, basements, etc.)
Considerations for neutralizer usage when draining into septic systems
Best practices for maintaining professional relationships with code officials

Check out some of Craig’s great educational books at https://www.acservicetech.com/.

Have a question that you want us to answer on the podcast? Submit your questions at https://www.speakpipe.com/hvacschool.

Purchase your tickets or learn more about the 6th Annual HVACR Training Symposium at https://hvacrschool.com/symposium. Subscribe to our podcast on your iPhone or Android. Subscribe to our YouTube channel. Check out our handy calculators here or on the HVAC School Mobile App for Apple and Android.