When I first started in the trade, we used to run into shielded control wires on the Carrier Comfort Zone 1 zoning systems and also on a Carrier VVT system I used to maintain at a bank. I knew it had something to do with electrical “noise” and that communicating systems often called for it, […]

I’ve been designing a system for a home here in Dallas and noticed a couple of interesting (and disturbing!) things about the equipment’s advertised capacity vs. the actual capacity at design conditions.  Equipment is rated at AHRI conditions (95 degrees outside and 80-degree dry bulb, 67-degree wet bulb inside). These conditions make equipment performance LOOK […]

Valve core removal tools were originally developed to remove damaged valve cores without the need to pump the system down. This technology was a major leap forward in work efficiency, as pumping down a system can be a tedious and time-consuming task.   Eventually, technicians discovered that removing valve cores led to faster evacuation, recovery, and […]

 Blake Standen and Omar Tabba of BrainBox AI join the HVAC School podcast to talk about commercial HVAC predictive control. This conversation focuses on applying artificial intelligence to existing building systems, including the HVAC, to predict performance under certain weather and occupancy conditions. If you have controls that can predict performance and adapt, then […]