Valve core removal tools were originally developed to remove damaged valve cores without the need to pump the system down. This technology was a major leap forward in work efficiency, as pumping down a system can be a tedious and time-consuming task.   Eventually, technicians discovered that removing valve cores led to faster evacuation, recovery, and […]

I wanted to offer some practical advice from Bryan’s last podcast, “White Shirt Techs- Manifesto.” The link can be found here. In this episode, Bryan strongly (and rightfully) critiques sales tactics that are divorced from technical skills and meaningful benefits for homeowners.  As a one man HVAC company, I wanted to offer a suggestion for […]

Fundamentally, three-phase, alternating current (AC) motors are about as simple as a motor gets. The power company produces three phases by spinning magnets. Then, on the other end, we produce electromagnets that spin the motor according to the same 60 cycles per second frequency (60hz). All three phases are 120 degrees out of phase from […]

 This episode was recorded live on location at the 2024 ACCA conference in Orlando. Bryan starts by interviewing Marissa Reddy, a co-founder of Conduit Tech, a software company providing load calculation and sales tools for HVAC contractors. Marissa shares insights into what it takes for contractors to successfully adopt new technology in their businesses. […]