Jonathan has worked with DiversiTech for over 16 years and has spent the majority of his time focusing on product development. He has experience as a manufacturing and product engineer and has served as the director of engineering for the past 6 years.
Deburring copper tubing (often called reaming) is the practice of running a blade around the inside of tubing after you cut it to remove the burr edge from the inside. It's an important practice and should be performed whenever possible. Deburring reduces turbulence inside the lines, as burrs can cause turbulence. HOWEVER… YOU MUST […]
This photo is of a blower door test we performed at my own house using a Retrotec blower door. You will notice the 15-passenger van outside the window, which is a dead giveaway. A blower door is used to measure the tightness of a building and is often discussed in terms of an ACH50 number. […]
Testo 557 vacuum gauge and Appion core removal tools shown I've had a change of heart. Back in the early 2000s, during the big construction boom, I did many system startups on residential units for a large company I worked for. When installers ran the line sets prior to startup, they weren't always very careful […]
Jonathan has worked with DiversiTech for over 16 years and has spent the majority of his time focusing on product development. He has experience as a manufacturing and product engineer and has served as the director of engineering for the past 6 years.
Tech Tips written:
Event speaker: