Franco D

Put three good tradespeople in front of the same problem, and you may see three different kinds of enthusiasm. One wants to understand why the system behaves that way. Another wants to get the failed part out and make the repair. The third is already thinking about the layout, access, and details that will make […]

Connecting more than one wire on or under a single lug or connection point is called “double lugging,” and it is ONLY allowed in line voltage wiring under one condition, according to NEC 110.14: If the terminal, lug, or connector is specifically rated for more than one wire In the case of a conductor splice, […]

Most techs and installers know that drains need to be pitched. I use the rule of thumb that drain lines should generally be pitched 1/4″ per foot of horizontal run. One thing that can easily be forgotten is pitching wall penetrations when drilling. It’s as simple as drilling with a slight upward angle if drilling […]