Simple, Easy Thermostat Install with White-Rodgers 70 Series
Subscribe to our Youtube channel
You can get your company name and phone number on the thermostat with contractor branding; to get contractor branding, visit procontractorbranding.com, select the thermostat type you’d like to brand, and upload your logo or fill in your company’s name and phone number. You will receive an imprint number that you can take to your local distributor, and they will order thermostats with your branding information; you must order a minimum of 12, and the printing and shipping are free.
The White-Rodgers 70 Series thermostats are exceptionally user-friendly. These thermostats come with easy-to-find mode selector switches on the side of the thermostat. They are also easy to install, as they come with level bubbles for easy mounting. Programmable thermostats can also easily have their programming disabled and operate the same as non-programmable thermostats; they come with internal selector switches for the most common operating options.
As with all thermostat installations, the first step of the process is to disable the power. Then, you’ll want to identify all of the conductors before you start wiring anything up. Once you identify the conductors and make sure you have all of them, you can read the manual and begin installing the thermostat, which can take as little as 5 minutes. The thermostat comes with screws, drywall anchors, and good-quality batteries. Start installing the thermostat by aligning it with the hole; then, you may start putting the screws in. You can then trim the conductors as needed and connect them to the thermostat appropriately. Once the face is back on, you can put batteries in the thermostat and go through the installer setup (if needed), including minimum and maximum temperatures
Leave a Reply