#short circuit

Tech Tips:

Why Many Techs Confuse Overload, Short, & Ground Fault

The point of this article is to give you a full understanding of the role fuses, overloads, and circuit breakers play in the protection of HVAC/R equipment. If you skim-read or jump to conclusions, you will be tempted to argue. Be patient; if you want to understand, you will need to read all the way […]

Kenneth
#ground fault #motor #overload #short circuit

Check out our most recent video

How to Evacuate an AC system, Full Vacuum Procedure

Our latest Podcast

HVAC School – For Techs, By Techs

Real training for HVAC ( Heating, Ventilation, Air Conditioning and Refrigeration) Technicians. Including recorded tech training, interviews, diagnostics and general conversations about the trade.

In this short podcast episode, Bryan talks about EER (Energy Efficiency Ratio) and SEER (Seasonal Energy Efficiency Ratio) and how to calculate EER in the field.

EER and SEER are ratings that we often see on equipment (as are SEER2 and EER2) based on a ratio of an output to an input. Whereas coefficient of performance (COP) is a direct ratio of watts out to watts in, EER and SEER account for BTUs and watts. EER and SEER indicate the cooling capacity (in BTUs) we get from the watts we put in.

The ratio changes based on field conditions, and EER2 and SEER2 have more realistic test conditions than EER and SEER (the static pressure for systems rated below 65,000 BTUs per hour was 0.1″wc for EER and SEER, and it is now 0.5″wc for EER2 and SEER2, which is much closer to average field conditions).

To determine EER, you have to figure out BTU production and stack it against your wattage. You’ll need to know your delta enthalpy (delta H), multiply it by the CFM, and then multiply the product of those by 4.5 to get your BTU output. A calculator on apps like measureQuick can help you find out your delta H, but you’ll need a proper wet-bulb temperature before you can do that. You can determine CFM with a TrueFlow grid or manufacturer’s blower charts.

Finding watts can be a challenge with ECMs and inverter-driven systems; it’s not as simple as volts x amps, and you will need a meter that can measure power factor and take readings from the condenser fan, compressor, and blower motor. That wattage becomes the number you divide into BTUs to get the EER. SEER is averaged over a season, HSPF is for heating instead of cooling, and you can convert the BTUs to watts (by multiplying by 3.41) and determine the ratio of watts out to watts in.

Have a question that you want us to answer on the podcast? Submit your questions at https://www.speakpipe.com/hvacschool.

Purchase your tickets or learn more about the 6th Annual HVACR Training Symposium at https://hvacrschool.com/symposium.

Subscribe to our podcast on your iPhone or Android.

Subscribe to our YouTube channel.

Check out our handy calculators here or on the HVAC School Mobile App for Apple and Android