#copeland

Tech Tips:

This tech tip is based on a podcast with Andre Patenaude from Copeland. You can listen to that podcast episode HERE, and we encourage you to check out some of the resources at the end of this tech tip—whether you’re all in on ramping your team up for CO2 or just CO2-curious. Carbon dioxide (CO2) […]

Axial, Radial, and Digital Scrolls

Courtesy of Copeland The design goal of most modern compressors is to make them more efficient and better able to match loads, hopefully without reducing ruggedness. The Copeland Scroll Digital™ or digital scroll is one compressor design that has become very popular due to its simplicity and versatility. But before we go further, let's define […]

WR Mobile App

The Universal Integrated Furnace Board with WR Connect from Copeland

Understanding Dual Fuel with Jim Fultz

Scroll Compressors & Things to Check for Overheating with Jeff Kukert

Copeland Compression Innovations at AHR 2024

Sensi Touch 2 Install

Modulating Compressors w/ Copeland

In this episode, Josh Souders from Copeland joins the HVAC School Podcast to discuss modulating and variable capacity technologies in HVAC systems. Josh provides an in-depth look at the different levels of modulation available in residential HVAC equipment, from traditional fixed-speed systems to two-stage, multi-stage, and true variable-speed compressors. The conversation covers the benefits […]

Committing to HVACR Education w/ Copeland

This podcast episode focuses on the critical shortage of HVACR technicians and installers across the industry. The hosts discuss the massive gap that exists, with estimates of nearly 200,000 open roles expected in the next few years. They are joined by Lenny Diaddario from Copeland's contractor services department and Chris Harris from the educational […]

How Better Truck Stock Makes The Trade Better W/ Jim Fultz

This live podcast from AHR Expo 2024 discusses the costs of truck rolls for HVAC technicians and how technicians and companies can reduce those costs. Jim and Bryan highlight that every time a tech has to go to the supply house to get parts, the company loses money in potential service calls that could […]

How To Properly Inspect a Failed Compressor

NOTE: If you cannot view the recording, the video may still be processing. The maximum wait time is 24 hours. We apologize for the delay and appreciate your patience.

Scroll Compressors & Things to Check for Overheating

NOTE: If you cannot view the recording, the video may still be processing. The maximum wait time is 24 hours. We apologize for the delay and appreciate your patience.

How to Evacuate an AC system, Full Vacuum Procedure

Our latest Podcast

HVAC School – For Techs, By Techs

Real training for HVAC ( Heating, Ventilation, Air Conditioning and Refrigeration) Technicians. Including recorded tech training, interviews, diagnostics and general conversations about the trade.

In this short podcast, Bryan talks about evaporator coil placement based on a question submitted by a listener, John. Evap coil placement differs in furnace applications versus air handlers.

When we use air conditioners with furnaces, we usually put evaporator coils on the positive side to protect the heat exchanger from rusting out during the summer (due to condensation and the chemical reactions that can occur with the metal heat exchanger). However, when it comes to air handlers, they’re usually on the negative side. The coil is usually on the negative side of a fan coil or air handler because it keeps the blower motor cooler (though that doesn’t make a huge difference in terms of performance).

The HVAC system will lose fewer BTUs to leakage when the coil is on the negative side, which is better for energy efficiency; those BTUs can reach the conditioned space rather than the closet, garage, or wherever it is stored. Pulling air over the evaporator coil on the negative side, however, could potentially lead to greater turbulence.

We run into challenges with evap coil placement on gas furnaces when we have dual fuel systems (a heat pump and furnace working together). You can’t run gas heat over a heat pump coil due to the high head pressure, so a parallel setup would avoid the risks of high head pressure (downstream) or rusted-out heat exchangers (upstream).

Have a question that you want us to answer on the podcast? Submit your questions at https://www.speakpipe.com/hvacschool.

Purchase your tickets or learn more about the 6th Annual HVACR Training Symposium at https://hvacrschool.com/symposium. Subscribe to our podcast on your iPhone or Android. Subscribe to our YouTube channel. Check out our handy calculators here or on the HVAC School Mobile App for Apple and Android.