This article is an extension of HVAC School’s “How to Measure Gas Pressure” video. Additional input was provided by Jim Bergmann. Bubble test procedures and standards were provided by Honeywell. Links to source materials are available at the end of this article. If there’s one complaint that HVAC techs should never take lightly, it’s a […]

There have been several past posts on our Facebook group page about a concept called bypass dehumidification. I think technicians could benefit from learning more about this topic.  Bypass dehumidification or airflow is an interesting method for utilizing mixed air temperatures to maximize a system’s dehumidification capabilities. It's also a means of supplying adequate air […]

First, let's give proper credit. Most of the best practices and tools for diagnosing ECM and X13 motors come from Regal/Genteq and their site, thedealertoolbox.com, and their app, The Dealer Toolbelt. Your best bet is to follow the practices shown there and use their TECInspect diagnostic tool shown below. Here is the general process to […]