Every HVAC/R tech needs an electronic leak detector nowadays, and with HFC refrigerants getting more and more commonplace, every HVAC/R tech needs a VERY sensitive electronic leak detector. We often see three types, but let's toss out the corona discharge leak detector right off the top. It just picks up too many other types of […]

Sometimes, we can focus on the more complicated aspects of a system and parts installation—like evacuation and flowing nitrogen—and forget the simple and critical common-sense steps to keep contaminants out of the system. One of these is pre-cleaning the tubing and connection before cutting or unsweating. For example: If you are replacing a coil, use […]

This quick article was written by market refrigeration tech Clayton Peeples. Thanks, Clayton! Adjusting the TXV should be done last after checking all other causes of the case being warm or floodback on the rack. TXVs very rarely go bad; generally, it's a dirty screen or a failed powerhead, both of which can be addressed […]