I get questions all the time about performing “load calculations” and “rules of thumb” or how to do it properly. This article isn't about load calculation, but the only good answer is to find a quality ACCA-approved Manual J software and get used to using it. You may have heard from others in the field […]

This is a video tech tip from our friend Brad at HVAC in SC. In this video, Brad demonstrates that using a cap off of a refrigerant tank on a system can depress the Schrader core on the system in some cases. Make sure to use proper caps that have seals or brass flare cones. […]

This photo is of a blower door test we performed at my own house using a Retrotec blower door. You will notice the 15-passenger van outside the window, which is a dead giveaway. A blower door is used to measure the tightness of a building and is often discussed in terms of an ACH50 number. […]