This article was written by Senior Boiler Tech Justin Skinner. Thanks, Justin. Oil burner nozzles are present in most forced combustion air burners. They are used with an oil pump to atomize fuel oil and allow it to burn. Atomizing is raising the pressure of the fuel and forcing it through the nozzle. Essentially, the […]

This tech tip comes from our contributor, compressor decapitator, and super tech Ulises Palacios. Many ductless systems and some high-efficiency unitary systems have electronic expansion valves. If you find one that is stuck closed, you may be able to get it open temporarily by putting a strong magnet like the one shown above on the […]

Evaporator temperatures below 32° are common and acceptable in refrigeration; that's why there is a defrost sequence. In a heat pump running in heat mode, it's the same; freezing is a part of the process, and defrost is necessary. In comfort cooling, we can't allow the evaporator to get below 32°, or it will freeze. […]