Now is the part where we get specific about start capacitors and inrush. If you haven't read the first three parts, please do so before reading this one, or it may not make sense. (You can find Part #1, Part #2, and Part #3 at these links.) I'm going to come out and say it […]

This article was submitted by Genry Garcia of Comfort Dynamics, Inc. It is the second part of his series on zonal pressure diagnostics. Thanks, Genry! In Part 1 of this series, we outlined the basic understanding of ZPD—what it means and what it does. Most importantly, we showed how an effort to simplify a fairly […]

First, let's get something straight: BRAZING is when you use a filler rod that isn't the same material as the base metal but melts ABOVE 840°F. Soldering is the same but at temperatures BELOW 840°F. With HVAC rods melting at around 1200°F, it confuses me why we usually call it “silver solder” but also often call it […]