First, let's give proper credit. Most of the best practices and tools for diagnosing ECM and X13 motors come from Regal/Genteq and their site, thedealertoolbox.com, and their app, The Dealer Toolbelt. Your best bet is to follow the practices shown there and use their TECInspect diagnostic tool shown below. Here is the general process to […]

When mounting a TXV bulb or checking bulb placement, there are a few important considerations (listed in order of importance): Mount the bulb on the suction line. Flapping in the breeze is no good. Mount it TIGHTLY with a proper metallic strap (usually copper, brass, or stainless steel)—not with zip ties or tape. Position it on […]

We have discussed many methods for checking a refrigerant charge without connecting gauges over the last few years. Recently, I've been thinking about the “approach” method of charging that many Lennox systems require. What is the Approach Method? The “approach” simply refers to the temperature difference between the liquid line leaving the condenser and the […]