System and Duct Design January 9, 2024, 9:28 pm

Comments

Related Tech Tips

Pressure Difference and Pump Flow
This article was written by Michael Housh, owner of Housh Home Energy and a regular contributor to HVAC School. Thanks, Michael! This is another article in trying to relate the air side of HVAC with the water side. In this article, I’m going to talk about how to determine pump flow (GPM) based on the […]
Read more
Is it too cold to set the charge?
I've heard the phrase, “It's too cold to set the charge!” for as long as I've been in the trade. I've also heard some variations of, “We need to come back and set the charge,” or, “We need to come back to do XYZ [some other thing].” Granted, there are cases where you do actually […]
Read more
Be Careful When Jumping Out a Blower
We've seen it before. A tech diagnoses a failed blower relay or board. They leave the blower jumped out by putting a terminal multiplier on the common terminal of the relay/board and connecting the fan speed tap right to power. There can be an issue with that. Some electric heat fan coils have a heat/blower […]
Read more
loading

To continue you need to agree to our terms.

The HVAC School site, podcast and daily tech tips
Made possible by Generous support from