System and Duct Design January 18, 2024, 4:56 pm

Comments

Related Tech Tips

Hydronics GPM Calculation and More...
This tech tip was written by a friend of HVAC School, Brian Mahoney. He is an HVAC instructor at Western Suffolk BOCES/Wilson Tech. Thanks, Brian! The podcast on delta T for A/C the other day got me thinking about the formula I learned in school about calculating the GPM of a hydronic system. We will […]
Read more
Introduction to VAV Systems
If you work in large commercial offices or mixed-use buildings, you almost certainly work with VAV systems regularly. If you aren't familiar with VAV, this is a quick intro to the basics so that they won't seem so overwhelming. VAV stands for variable air volume; this means that the AHU (air handling unit) can vary […]
Read more
3-Phase Motors—The Basics
Fundamentally, three-phase, alternating current motors are about as simple as a motor gets. The power company produces three phases by spinning magnets. Then, on the other end, we produce electromagnets that spin the motor according to the same 60 cycles per second frequency (60hz). All three phases are 120 degrees out of phase from one […]
Read more
loading

To continue you need to agree to our terms.

The HVAC School site, podcast and daily tech tips
Made possible by Generous support from