Some quick basics – An ohmmeter is used to measure the resistance to electrical flow between two points. The ohmmeter is most commonly used to check continuity. Continuity is not a “measurement” as much as it is a yes/no statement. To say there is continuity is to say that there is a good electrical path […]

First off, the correct acronym for a GFI (ground fault interrupter) is “GFCI” (ground fault circuit interrupter). The purpose is to act as a safety device to protect from electrical shock. GFCIs are important components of electrical safety. GFCIs can be built into outlets, circuit breakers, and even extension cords. We generally use them for […]

Proper sizing and orientation of grilles, registers, and diffusers may seem like such a simple thing, but it's an area where confusion and mistakes are commonly made. First, let's define some terms. Return  A return draws air into a return duct system with negative pressure compared to the space, usually via a fixed “grille” (also […]