Shane Jackson HVAC/R Evacuation Quiz October 7, 2021, 6:38 pm

By October 7, 2021

Shane Jackson HVAC/R Evacuation Quiz October 7, 2021, 6:38 pm

Check out our most recent video

How to Evacuate an AC system, Full Vacuum Procedure

Our latest Podcast

HVAC School – For Techs, By Techs

Real training for HVAC ( Heating, Ventilation, Air Conditioning and Refrigeration) Technicians. Including recorded tech training, interviews, diagnostics and general conversations about the trade.

John Ellis, a business consultant who specializes in IAQ training, joins the podcast to talk about effective filtration, product development, and more. John has recently worked with an OEM to bring field practicality and application to the engineers who design products.

Filtration design is a relatively poorly understood concept in the industry; we tend to overlook a filter’s ability to remove particulates from the air when we prioritize static pressure drop. We have to understand how the duct design can make higher-MERV filters work and how the face velocity plays into design and comfort.

John also talks about bypass HEPA filtration and its appropriate uses and potential for misapplication. Bypass HEPA may be integrated with the HVAC system (but run independently of the system) or installed independently of the HVAC; its effectiveness will be dictated by its runtime, and it doesn’t filter everything.

IAQ products and strategies need to produce quantifiable results, and our industry needs people to be trained to measure and produce those results, not push products. Education, integrity, and competence are the keys to starting conversations about IAQ methodologies that actually benefit the customer.

When we’re ready to have those conversations with the customer, we can show the customer that we prioritize their health, safety, and comfort; it’s good to use maintenance procedures as times to follow up with the customer and make sure their IAQ needs are being met. Communication is critical here.

John and Bryan also discuss:

Design, production, and distribution
MERV ratings
Oversized filter-back returns with media filters
Blow-by
Charcoal carbon pellets vs. activated carbon
Oxidizers and microbiology disruption
Sales resistance & being pushed to make more sales
Problems with circuit boards

Learn more about John’s work at https://thenewflatrate.com/ or contact him directly at (505)-652-8119.

Learn more about the 4th Annual HVACR Training Symposium or buy a virtual ticket today at https://hvacrschool.com/symposium.

If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, subscribe HERE.

Check out our handy calculators HERE.

Search Episodes

Effective Filtration & More w/ John Ellis

02/02/2023

Bryan Orr

Do Houses Need to Breathe? w/ Allison Bailes

01/26/2023

Bryan Orr

What the Heck is High Performance HVAC w/ David Holt

01/19/2023

Bryan Orr

Setting Realistic Customer Expectations w/ Ed Janowiak

01/12/2023

Bryan Orr

Mini Split Install and Service Tips

01/03/2023

Bryan Orr

CO Doesn't Leak w/ David Richardson

12/29/2022

Bryan Orr

One HSI Furnace Control to Rule Them All w/ Jim Fultz

12/27/2022

Bryan Orr

Using Ice to Balance Energy Consumption

12/22/2022

Bryan Orr

We need to Pay Better! – An Audio Manifesto

12/20/2022

Bryan Orr

Refrigerant Myth Busting w/ Dr. Chuck

12/15/2022

Bryan Orr

Search Results placeholder

Related Tech Tips

The Friction Rate Chart (and What it Means)

A lot of proper duct design comes down to an understanding of available static pressure and friction rate. We've covered this topic several times on this site and the podcast, but I wanted to focus on this ACCA chart specifically (shown above). If you want a deep dive, I highly recommend listening to my podcast […]

What Techs Need to Know About A2L Refrigerants

This article is based on the recent HVAC School podcast episode on A2L refrigerants with Jason Obrzut. You can listen to that podcast HERE. Jason is a member of the AHRI Safe Refrigerant Transition Task Force and has co-authored Refrigeration and Air Conditioning Technology (the RACT manual). You can access AHRI’s A2L refrigerant resources at […]

How Long Should I Evacuate a System?

This article was written by Jim Bergmann with MeasureQuick. Anyone who has ever picked up a vacuum pump has asked or been asked this question. To be truthful, it is like asking, “How many licks will it take to get to the center of a Tootsie Roll Tootsie Pop?” In the words of the wise […]

More tech tips