Get Tech Tips
Subscribe to free tech tips.
Scott HVAC/R Evacuation Quiz November 1, 2021, 11:38 pm
Related Tech Tips

First, let's get something straight: BRAZING is when you use a filler rod that isn't the same material as the base metal but melts ABOVE 840°F. Soldering is the same but at temperatures BELOW 840°F. With HVAC rods melting at around 1200°F, it confuses me why we usually call it “silver solder” but also often call it […]
Read more
Take a look at the specs from this Copeland scroll compressor pulled from the Copeland Mobile App (which is an incredible app, by the way). These specs are for a single-phase compressor, so the amperages listed are based on an amperage reading from the wire connected to the common terminal. LRA is the locked rotor […]
Read more
This article was written by Senior Boiler Tech Justin Skinner. Thanks, Justin. Oil burner nozzles are present in most forced combustion air burners. They are used with an oil pump to atomize fuel oil and allow it to burn. Atomizing is raising the pressure of the fuel and forcing it through the nozzle. Essentially, the […]
Read more