The primary role of setting an appropriate level of subcooling is to ensure that we deliver a full line of liquid refrigerant to the metering device. We want to do this at: A pressure differential required by the metering device At a temperature and pressure no higher than required for maximum capacity and efficiency But […]

This article is not a full lesson on making a flare, but it will give you some best practices to make a flare that doesn't leak. First off, we need to clarify that very few unitary manufacturers use flares anymore. You will most often find flares on ductless and VRF/VRV systems and in refrigeration. A […]

This article is an updated version of another HVAC School article on oversized equipment. This edition is a joint effort by Genry Garcia of Comfort Dynamics, Inc. and Kaleb Saleeby. Both of them are regular contributors to HVAC School, and we are grateful for their contributions. Thanks, guys! The symptoms and consequences of oversized heating […]