Ryan Young System and Duct Design December 29, 2023, 4:36 am

Comments

Related Tech Tips

The Basic Residential Maintenance for a Heat Pump / Electric System
I need to warn you… The following list is the actual process we use at the company I own for our typical “standard” residential maintenance. I'm sure you will find some things you do differently. Take it for what it is, and I'm happy to get any feedback you may have. Read the call notes, […]
Read more
Does An Oversized Furnace Consume More Fuel?
This article was written by Michael Housh and was inspired by a discussion that took place on the HVAC School Facebook group. If you are already a member of the group, you can look at the oversized furnace discussion yourself HERE. I'd like to give a special thanks to Michael and everyone who contributed to the conversation. […]
Read more
Pitch on Line Penetrations
Most techs and installers know that drains need to be pitched. I use the rule of thumb that drain lines should generally be pitched 1/4″ per foot of horizontal run. One thing that can easily be forgotten is pitching wall penetrations when drilling. It's as simple as drilling with a slight upward angle if drilling […]
Read more
loading

To continue you need to agree to our terms.

The HVAC School site, podcast and daily tech tips
Made possible by Generous support from