The piston (fixed orifice) and TXV (thermostatic expansion valve) are the two most common metering devices in use today, though some modern systems utilize an electronically-controlled metering device called an EEV (electronic expansion valve). It should be noted that there are other types of fixed-orifice metering devices, like capillary tubes; however, their use is not […]

The price of R22 is getting ridiculous, and one of the #1 requests I have been getting is for recommendations on other refrigerants to use in place of R22 and best practices, so here we go. No, you shouldn't mix There are NO refrigerants that you are supposed to use to top off an R22 […]

Deburring copper tubing (often called reaming) is the practice of running a blade around the inside of tubing after you cut it to remove the burr edge from the inside. It's an important practice and should be performed whenever possible. Deburring reduces turbulence inside the lines, as burrs can cause turbulence. HOWEVER… YOU MUST MAKE […]