There was a question in the Facebook group a few days ago about averaging sensors. There are two common configurations/methods used for averaging. The first is simply a setting in a thermostat or control where it reads separate sensors, and then the thermostat itself averages out the readings using its software. For example, if the […]

Jesse Grandbois is one of the techs who reads the tech tips, and he wrote a few tips that he wanted to share on some gas furnace control basics. This tip is about the basic terminal designations on a typical 24v gas valve. Thanks, Jesse! Have you ever noticed the TH/TR terminal on a gas […]

This is Part 4 series by Senior Refrigeration Tech (and prolific writer) Jeremy Smith. Pay attention to this one, folks. I know rigging and safe lifting practices may be boring to some of you, but it could very well save your back or your life. Disclaimer This article is written by a technician representing his […]