We've seen it before. A tech diagnoses a failed blower relay or board. They leave the blower jumped out by putting a terminal multiplier on the common terminal of the relay/board and connecting the fan speed tap right to power. There can be an issue with that. Some electric heat fan coils have a heat/blower […]

This article is written by tech and business owner Genry Garcia from South Florida. I met Genry at a Solderweld demonstration, and he later offered to write this excellent article. Thanks, Genry! Though dehumidifiers have increased in popularity, thanks in part to the implementation of new building codes, they have become a kind of red-haired […]

When tightening down a blower wheel or a fan blade on a motor shaft, ONLY tighten it on the flat of the shaft. If you have more than one screw but only one flat surface on the shaft, only tighten the one set screw. Also… Refrain from over-tightening set screws; they need to bite into […]