I am consistently surprised by how much false information still circulates out in the field, and one of the ones I hear often is the idea that you cannot or should not “top-off” or recharge R410a systems on top of an existing charge of R410a when the system is low. So, to be clear, before […]

Evaporator temperatures below 32° are common and acceptable in refrigeration; that's why there is a defrost sequence. In a heat pump running in heat mode, it's the same; freezing is a part of the process, and defrost is necessary. In comfort cooling, we can't allow the evaporator to get below 32°, or it will freeze. […]

This article was inspired by a podcast episode featuring Jeremy Smith. Jeremy is a refrigeration mechanic and has contributed a lot of good material to HVAC School. You can listen to that podcast on floating suction and head HERE. Those of you who drive your own vans are probably all too familiar with the following […]