This quick article was written by market refrigeration tech Clayton Peeples. Thanks, Clayton! Adjusting the TXV should be done last after checking all other causes of the case being warm or floodback on the rack. TXVs very rarely go bad; generally, it's a dirty screen or a failed powerhead, both of which can be addressed […]

I have spent the last few days checking run capacitors on various systems with several different meters, and this is what I found: #1 – Comparing Start wire amps against Run + Common under the clamp together is meaningless as a practical test. I used this test on 3 different systems with 3 different meters […]

If you went to school and learned the “gas laws” early on, you probably thought it seemed LAME. Then, later, things like mass flow rates, airflow conversions, and compression ratios seemed HARD. Well… It's because HVAC is hard if you don't understand the concepts behind the gas laws, even if you never learn to do […]