This tip was a COMMENT on the sensible heat ratio tip left by Jim Bergmann. As usual, Jim makes a great point; once you get the “sensible” capacity for a piece of equipment at a set of conditions, you can easily calculate a true target delta T. Another interesting thing you can do is use […]

Jesse Grandbois is one of the techs who reads the tech tips, and he wrote a few tips that he wanted to share on some gas furnace control basics. This tip is about the basic terminal designations on a typical 24v gas valve. Thanks, Jesse! Have you ever noticed the TH/TR terminal on a gas […]

Sometimes, we can focus on the more complicated aspects of a system and parts installation—like evacuation and flowing nitrogen—and forget the simple and critical common-sense steps to keep contaminants out of the system. One of these is pre-cleaning the tubing and connection before cutting or unsweating. For example: If you are replacing a coil, use […]