In many cases when a low-voltage or control circuit blows a fuse, it's because one of the circuits is shorted to ground or common. That may happen because of rubbed-out wires, shorted components or boards, etc. Routing wires sensibly and using proper grommets to avoid rubouts and shorts will help prevent those problems. Less commonly, […]

If you work in large commercial offices or mixed-use buildings, you almost certainly work with VAV systems regularly. If you aren't familiar with VAV, this is a quick intro to the basics so that they won't seem so overwhelming. VAV stands for variable air volume; this means that the AHU (air handling unit) can vary […]

Some quick basics – An ohmmeter is used to measure the resistance to electrical flow between two points. The ohmmeter is most commonly used to check continuity. Continuity is not a “measurement” as much as it is a yes/no statement. To say there is continuity is to say that there is a good electrical path […]