Refrigeration Basics Quiz April 28, 2023, 5:48 am

By April 28, 2023

Refrigeration Basics Quiz April 28, 2023, 5:48 am

Check out our most recent video

How to Evacuate an AC system, Full Vacuum Procedure

Our latest Podcast

HVAC School – For Techs, By Techs

Real training for HVAC ( Heating, Ventilation, Air Conditioning and Refrigeration) Technicians. Including recorded tech training, interviews, diagnostics and general conversations about the trade.

In this short podcast episode, Bryan talks about motor speed and other basic electrical topics as they relate to motors in HVAC equipment.

In a typical single-phase PSC-type (induction-driven) motor, the speed is primarily determined by the electrical cycle rate, also known as the hertz. The hertz represents the speed at which the electrical current changes direction (positive to negative) per second; in the USA, that number is typically 60 hertz. Unless we’re dealing with ECMs and VFD-driven motors, the motor speed will be partially influenced by the hertz or frequency as determined by the utility company or a generator.

Motor speed is also determined by the number of magnetic poles in the motor. A motor doesn’t make a complete revolution per cycle; a cycle only refers to the distance between two poles. The more poles we have, the shorter the distance needs to turn per cycle. A two-pole motor rotates all the way every cycle, resulting in 3600 RPM under no-slip conditions (synchronous speed). A four-pole motor has half the RPM, and an eight-pole motor has 1/4 of the RPM of a two-pole motor.

Speed taps add winding resistance between run and common to create slip and slow the motor. A six-pole motor has 1200 RPM synchronous, but 1075 is the effective speed with slip factored in. Each speed has a different level of winding resistance, which slows the motor as you move from high to low; the lower-speed tap has higher resistance than high-speed taps.

ECMs and VFD-driven systems convert the frequency and don’t depend on the electrical frequency from the utility or generator.

Learn more about the HVACR Training Symposium or buy a virtual ticket today at https://hvacrschool.com/symposium.

If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, subscribe HERE.

Check out our handy calculators HERE.

Search Episodes

Motor Speed – Short #164

05/30/2023

Bryan Orr

Growing in Productivity and Confidence as a Tech w/ Refrigeration Mentor

05/25/2023

Bryan Orr

The Art of Unteaching w/ MeanHVAC

05/18/2023

Bryan Orr

Floating vs. Fixed Suction and Head – Short #163

05/16/2023

Bryan Orr

Humidity Utopia w/ Nikki & Bryan

05/11/2023

Bryan Orr

What the Flux? – Short #162

05/09/2023

Bryan Orr

The Impacts of Duct Leakage w/ Steve Rogers

05/04/2023

Bryan Orr

Launch of the Sensi Touch 2 Thermostat

05/02/2023

Bryan Orr

Why and How to Create an Internal Training Program W/ Eugene S.

04/27/2023

Bryan Orr

When Subcooling is Meaningless – Short #161

04/25/2023

Bryan Orr

Search Results placeholder

Related Tech Tips

This is Not a Soft Start

I used to call PTCR devices a "Soft Start". I was wrong.

A Liquid Line Solenoid and What it Does

Depending on what segment of the business you are in and your location, you either work on pump down solenoid systems all the time, or YOU HAVE NO CLUE what they are. A liquid line solenoid is just a valve that opens and closes; it has a magnetic coil. Depending on whether the valve is […]

Three-Phase Voltage Imbalance

When reading ANY article about electrical theory or application, keep in mind that it will only scratch the topic's surface. You can dedicate years of your life to understanding electrical theory and design the way many engineers do and still know just enough to be dangerous. In HVAC, we rarely need to have a DEEP […]

More tech tips