When tightening down a blower wheel or a fan blade on a motor shaft, ONLY tighten it on the flat of the shaft. If you have more than one screw but only one flat surface on the shaft, only tighten the one set screw. Also… Refrain from over-tightening set screws; they need to bite into […]

We've been getting many questions on micron gauges that are ”going haywire” or reading in the micron range, even at atmospheric pressure. First, micron gauges measure absolute pressure, so you can’t ”zero” them out. They use tiny, very sensitive sensors that are calibrated to air, not refrigerant, so anytime refrigerant gets into the gauge, it's […]

The way we use and think of refrigerants is evolving quite rapidly. As we shift towards phasing out ozone-depleting refrigerants and considering alternatives, the future of refrigerants may seem a little uncertain to us. However, one thing is certain. Many HVAC units will continue to rely on the common HCFC, HFC, and HFO refrigerants we […]