In a previous article, we covered the standard way to check capacitors under load. I am now going to give you an even easier test. A properly functioning PSC (permanent split capacitor) or CSCR (capacitor start capacitor run) motor should have a power factor of very close to 1 if they have a properly sized […]

First, let's get something straight: BRAZING is when you use a filler rod that isn't the same material as the base metal but melts ABOVE 840°F. Soldering is the same but at temperatures BELOW 840°F. With HVAC rods melting at around 1200°F, it confuses me why we usually call it “silver solder” but also often call it […]

I've heard a lot made of clocking gas meters over the years, and honestly, in Florida, there isn't too much call for heat. There are even fewer furnaces. I was pleasantly surprised when I found out how easy it actually is. Here is how you do it, step by step: #1 – Make sure all […]