quiz for symposium-test January 29, 2024, 1:58 am

Comments

Related Tech Tips

5% vs. 15% Silver Solder (Brazing Rod)
First, let's get something straight: BRAZING is when you use a filler rod that isn't the same material as the base metal but melts ABOVE 840°F. Soldering is the same but at temperatures BELOW 840°F. With HVAC rods melting at around 1200°F, it confuses me why we usually call it “silver solder” but also often call it […]
Read more
Getting the Right Part: The Often Overlooked Part Numbers You Should Care About
This article was written by Regan Murphy. Thanks, Regan! Disclaimer: Any percentages used are the opinion of the author and not based on any actual facts. You are probably already used to getting the model and serial numbers of the equipment. You may have even made a habit of getting the part number, but there […]
Read more
Stacking Evaporator Coil Stages
In commercial HVAC, you will find several different types of multi-stage evaporator coils: intertwined (shown above), horizontal face split (one coil on top of another), and vertical (side by side). When staging a horizontal evaporator, pay attention to ensure that stage #1 is on the bottom and stage #2 is on the top. If stage […]
Read more
loading

To continue you need to agree to our terms.

The HVAC School site, podcast and daily tech tips
Made possible by Generous support from