This article was written by Michael Housh and was inspired by a discussion that took place on the HVAC School Facebook group. If you are already a member of the group, you can look at the oversized furnace discussion yourself HERE. I'd like to give a special thanks to Michael and everyone who contributed to the conversation. […]

When you work on a heat pump system and want to test defrost, you can follow many different test procedures to test the board and sensors. Most involve “forcing” a defrost by shorting out pins on the board or advancing the time of the defrost initiation and installing a factory-provided pin jumper. Lots of pins […]

Photo Courtesy of Parker/Sporlan There are many brands and styles of evaporator pressure regulating valves (EPR), but none as common as the Parker/Sporlan SORIT and ORIT valves. The diagram above clearly shows some of the common applications. An EPR or “hold back” valve maintains a set suction line pressure and, therefore, coil temperature. That is […]