We all know (or should know) that venting refrigerant is a big no-no and can result in trouble from the EPA. There are many other potential violations, but two of them can easily occur if you aren't thinking ahead at the disposal of mercury and oil. Mercury is found in fairly large quantities in the […]

Most techs and installers know that drains need to be pitched. I use the rule of thumb that drain lines should generally be pitched 1/4″ per foot of horizontal run. One thing that can easily be forgotten is pitching wall penetrations when drilling. It's as simple as drilling with a slight upward angle if drilling […]

You are probably all familiar with radiant barriers. Sometimes, it is thin foil draped under the roof deck. Other times, it's used on the inside of stud walls or over furring strips before the drywall goes up, and there is even plywood with a radiant barrier attached to one side that is used for roof […]