Mike Kerr Basic Electrical Theory June 21, 2021, 4:32 pm

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Related Tech Tips

Understanding “P” Traps in Refrigerant Lines
This article was written by Don Gillis with Chemours. Thanks, Don! There are 3 main reasons we use “P” or “U” traps: Assisting in oil return to the compressor Preventing oil accumulation in the evaporator  Preventing liquid refrigerant or oil from entering the compressor while operating or during the off cycle Assisting in oil return […]
Read more
Why Checking Gas Valve Leakage is Hard
This article is an extension of HVAC School’s “How to Measure Gas Pressure” video. Additional input was provided by Jim Bergmann. Bubble test procedures and standards were provided by Honeywell. Links to source materials are available at the end of this article. If there’s one complaint that HVAC techs should never take lightly, it’s a […]
Read more
Infrared vs. Heated Diode Leak Detectors
Every HVAC/R tech needs an electronic leak detector nowadays, and with low-GWP HFC and HFO refrigerants getting more and more commonplace, every HVAC/R tech needs a VERY sensitive electronic leak detector. (Yes, electronic leak detection does work.) We often see three types, but let's toss out the corona discharge leak detector right off the top. […]
Read more
loading

To continue you need to agree to our terms.

The HVAC School site, podcast and daily tech tips
Made possible by Generous support from