To start, I'm going to cut straight to the part that most of you want to know. This information is based on calculations I have done personally based on typical Mastercool DOT tanks, but feel free to come to your own conclusions based on your own calculations. I prefer to stay on the safe […]

When you walk up to a piece of equipment, you want to follow a process to ensure that you accomplish five things: #1 – You diagnose the fault correctly. #2 – If possible, you find the “why” of the failure. #3 – Find any other problems or potential problems with the system that can cause […]

First, let's give proper credit. Most of the best practices and tools for diagnosing ECM and X13 motors come from Regal/Genteq and their site, thedealertoolbox.com, and their app, The Dealer Toolbelt. Your best bet is to follow the practices shown there and use their TECInspect diagnostic tool shown below. Here is the general process to […]