On an energized, intact circuit, you will read voltage across an OPEN switch when testing with a voltmeter. However, you probably won't read significant voltage across a CLOSED switch. Both sides of a closed switch are electrically identical (or at least very close). Therefore, there should be no movement of electrons between the leads of […]

In many cases when a low-voltage or control circuit blows a fuse, it's because one of the circuits is shorted to ground or common. That may happen because of rubbed-out wires, shorted components or boards, etc. Routing wires sensibly and using proper grommets to avoid rubouts and shorts will help prevent those problems. Less commonly, […]

UPDATED VERSION AS OF 4/1/2020 As HVAC contractors, we are tasked with keeping staff and customers safe during the outbreak, and we are relied upon to provide some guidance to customers about how to protect themselves against the virus in the air. For employers and employees looking to navigate the new FMLA/FFRCA legislation, we put […]