Dehumidification features have been common on residential systems ever since the introduction of variable speed blower motors. The system is set up so that the blower can produce less CFM per ton when the latent load (humidity) in the space is higher than the setpoint relative humidity. Slowing the blower increases moisture removal by […]

Newer technicians often get hung up and frustrated when searching for low voltage shorts. This is understandable due to the broad spectrum of possibilities for the location of the short. However, this doesn’t mean that the process needs to be complex. The time it takes to find a low voltage short may vary greatly depending […]

Let's use a bit of imagination for a minute. Imagine you have two totally identical 3-ton systems. One of them is completely normal, and the other has no fins at all on the evaporator coil. They both have the same charge, airflow, and compressor capacity. What will be different in terms of readings and performance […]