We've been getting many questions on micron gauges that are ”going haywire” or reading in the micron range, even at atmospheric pressure. First, micron gauges measure absolute pressure, so you can’t ”zero” them out. They use tiny, very sensitive sensors that are calibrated to air, not refrigerant, so anytime refrigerant gets into the gauge, it's […]

First off, the correct acronym for a GFI (ground fault interrupter) is “GFCI” (ground fault circuit interrupter). The purpose is to act as a safety device to protect from electrical shock. GFCIs are important components of electrical safety. GFCIs can be built into outlets, circuit breakers, and even extension cords. We generally use them for […]

This article was inspired by a podcast episode featuring Jeremy Smith. Jeremy is a refrigeration mechanic and has contributed a lot of good material to HVAC School. You can listen to that podcast on floating suction and head HERE. Those of you who drive your own vans are probably all too familiar with the following […]