“Service factor” is an interesting motor rating that you will see on many motor data tags. It simply means how much additional “work” a motor can do or how much “load” it may be placed under for short periods of time without failure or overload. For example, the FLA or full load amps of the […]

In this episode Phil from Building automation monthly comes on and talks building automation and demystifies some of how it works. If you have an iPhone subscribe to the podcast HERE and if you have an Android phone subscribe HERE

Pump down solenoid valves are commonplace for any refrigeration technician. They are energized with the compressor still running, shutting off flow in the liquid line so that the refrigerant is pumped into the condenser and receiver. The compressor will then shut off once a low-pressure switch opens the circuit when the pressure falls below a […]