Fundamentally, three-phase, alternating current motors are about as simple as a motor gets. The power company produces three phases by spinning magnets. Then, on the other end, we produce electromagnets that spin the motor according to the same 60 cycles per second frequency (60hz). All three phases are 120 degrees out of phase from one […]

There is almost nothing worse than creating something—or doing something you are proud of—and getting no feedback. Wait, I take that back. Putting your heart and soul into something and then getting negative or dismissive feedback can be worse. How many times have you emailed a quote, a design, or photos of something asking for […]

When brazing and soldering, we have a few things we need to accomplish to make a proper connection: We can't overheat the joint until it overheats the base metal or the flux where applicable. We must bring the entire joint above the melting temperature of the brazing alloy. Draw the alloy deep into the joint. […]