Get Tech Tips
Subscribe to free tech tips.
Kip Stubbs Moving Heat Quiz September 12, 2021, 11:12 am
Related Tech Tips

This article is not a full lesson on making a flare, but it will give you some best practices to make a flare that doesn't leak. First off, we need to clarify that very few unitary manufacturers use flares anymore. You will most often find flares on ductless and VRF/VRV systems and in refrigeration. A […]
Read more
We get a lot of questions about both evacuation procedure and TXVs so last week we produced videos on both topics, including: • Before and after testing of piston vs. TXV • Using the Bluvac Measurequick app • Use of core remover tools for evacuation • Flowing nitrogen • creating an external equalizer port and […]
Read more
When mounting a TXV bulb or checking bulb placement, there are a few important considerations (listed in order of importance): Mount the bulb on the suction line. Flapping in the breeze is no good. Mount it TIGHTLY with a proper metallic strap (usually copper, brass, or stainless steel)—not with zip ties or tape. Position it on […]
Read more