Over the past year, we have been adding 3D animations to our YouTube channel. It can be difficult to film everything we do in the field, so we've found 3D animations to be a helpful tool to show how parts work and how to do certain tasks. So far, we've uploaded nine 3D animations. This […]

I've heard a lot made of clocking gas meters over the years, and honestly, in Florida, there isn't too much call for heat. There are even fewer furnaces. I was pleasantly surprised when I found out how easy it actually is. Here is how you do it, step by step: #1 – Make sure all […]

Deburring copper tubing (often called reaming) is the practice of running a blade around the inside of tubing after you cut it to remove the burr edge from the inside. It's an important practice and should be performed whenever possible. Deburring reduces turbulence inside the lines, as burrs can cause turbulence. HOWEVER… YOU MUST MAKE […]