The TXV powerhead or power element is the part of the valve that sits on top of the valve to which the sensing bulb is attached. The powerhead provides the opening force for the valve by translating force from the bulb to a diaphragm in the element that forces the valve open. The sensing bulb […]

Here is another excellent article from Michael Housh, owner of Housh Home Energy and a regular contributor to HVAC School. Thanks, Michael! I thought I would go through a simple example of sizing a hydronic circulator for an application. This is a made-up scenario, but I sketched out a 20’ x 20’ square home with […]

This question was submitted on the site in response to the recent GFCI tip. It's a good question with several possible answers. What do you think? Hey Bryan, I have had a few instances where we are firing off a furnace in a new build with a temporary power pole outside with gfci outlets installed […]