I got a lot of comments that many of you discharge run capacitors with a voltmeter. I test this method vs. the capacitor discharge tool I created. Obviously, many of you use needle nose pliers or a screwdriver. While this is widely practiced, it could result in an arc, shock, or damage to the capacitor. […]

I see a lot of techs and installers use tape over foam tubing insulation joints (Rubbatex, Armaflex, etc.) rather than using the glue that is designed for it. Some of them use tape because they don't know the glue exists; some use tape because it's what they happen to have on the truck, and others […]

When you first start checking your supply air with a thermo-hygrometer, you may notice that the relative humidity is REALLY HIGH. Often, the RH in a supply duct will be between 85% and 96% relative humidity on a system that is functioning as designed. The reason for this is fairly simple: In order for dehumidification […]