Here is part 2 from Michael Housh from Housh Home Energy in Ohio. Thanks, Michael! This is part two in a series on a deeper look into the sensible heat rate equations. You can find the first article here HERE if you missed it. This article will dive deeper into the density of “standard air” […]

Photo by Stephen Rardon I hear it all the time. Someone will talk about undesired condensation on an air handler cabinet, on a supply air duct, in a ventilation duct, or on a vent like the one above. In reply, someone will inevitably say, “Condensation occurs where hot meets cold.” Early on in my career, […]

Most motors are designed to a set amount of work, usually rated in either watts or horsepower (746 watts per HP). Watt's law states that watts = volts x amps. If a particular motor needs to do 1 horsepower of work at 120 volts, it will draw about 6.22 amps. And yes, in an inductive […]