Most techs and installers know that drains need to be pitched. I use the rule of thumb that drain lines should generally be pitched 1/4″ per foot of horizontal run. One thing that can easily be forgotten is pitching wall penetrations when drilling. It's as simple as drilling with a slight upward angle if drilling […]

When testing a run capacitor, many techs pull the leads off and use the capacitance setting on their meter to test the capacitor. On a system that is not running, there isn't anything wrong with this test. However, when you are CONSTANTLY checking capacitors as a matter of regular testing and maintenance, that extra step […]

There is a common belief in the trade that the higher the subcooling, the better the system efficiency because lower liquid line temperature means less flash gas. This statement is only partially true and can lead to some confusion among techs. Subcooling is a temperature decrease below the condensing temperature of the refrigerant that occurs […]